Brick repair in Turlock CA - solid joints and a wall that looks like one piece
Crumbling mortar or bricks flaking apart? We sort out what's failing, replace the bad bricks and repoint the joints so your wall holds up.
Brick repair starts with finding what failed
Brick repair in Turlock comes down to whether the trouble is in the mortar or in the bricks. Repointing means raking out worn mortar and packing the joints with fresh, and it only helps when the bricks are sound. At Precision Turlock Concrete and Masonry, I check that first, because a cracked brick, or a spalled one whose face has broken away, lets water in and needs replacing.
The price moves with how many bricks come out, how much of the wall needs new mortar and how tall it is, since scaffolding adds cost. The schedule turns on matching the brick and on whether a permit is needed. The state licensing board licenses masonry contractors for brick work like this, and we're licensed and insured. I walk the job and write up what I'd do.
- The cause found before any mortar goes in
- Old mortar cut out without nicking the brick
- Replacement bricks that match size and color
- New joints that blend with the old ones
Repoint, replace or rebuild a section
The right fix depends on whether the damage stops at the mortar or reaches the bricks, and picking wrong means paying twice for the same wall.
Repoint the joints
- When it fits
- Mortar is crumbling, hollow or pulling away, but every brick is still sound.
- What we do
- Cut out the worn mortar and pack the joints with fresh mortar that matches.
Replace and repoint
- When it fits
- A few bricks are cracked, loose or flaking, and the joints around them are worn.
- What we do
- Swap out the bad bricks, then repoint around them so the wall reads as one.
Rebuild a section
- When it fits
- Bricks are failing across a whole area, or part of the wall is loose.
- What we do
- Take that section down to sound brick and lay it back up the right way.
How a brick repair job runs
You reach out
Call or send the form with what you're seeing, and photos of the joints and bricks help. We get back to you to set up a visit.
I look it over
I come out myself, find what caused the damage and write up what I'd do, and if a permit is needed, we handle the paperwork.
The crew does it
Our crew lead and masons cut out the bad mortar, swap any failing bricks and repoint around them so the wall reads as one piece.
I check it
I look the wall over myself before we call it done, and the crew cleans up the dust and mortar before they leave.
What to weigh before the work starts
These points shape what I recommend and what goes on the estimate, so they're worth thinking about before anyone picks up a chisel.
Joints wear out first
Mortar joints typically last more than 25 years, while the bricks can go well past 100, so the joints are the part you plan to renew over a wall's life.
Fix the cause first
Mortar fails for a reason, so the cause gets fixed before repointing. If water off driveway pavers or a retaining wall is soaking your brick, I'll tell you.
Getting the color right
Sand color and cement type change how new mortar looks, so it's worth asking for a sample in a hidden spot on the wall before the whole job goes in.
Care with older brick
For historic brick, federal preservation guidance favors hand chisels for cutting out mortar, because they take more labor but pose the least risk, while power saws on thin joints almost always damage the brick.
What good brick repair looks like
Look for new joints that match the old ones in color and depth, and replacement bricks that don't stand out. Open any photo to see it up close.
Tell us about your wall
Send photos of the joints and bricks with the wall's size and height, or call. We reply within one business day, and I'll come out for a free, no-obligation estimate.
To talk now, call
(209) 410-9284Brick repair questions we hear
Another question? Call (209) 410-9284
How much does brick repair cost in Turlock, CA?
Brick repair usually costs about $500 to $2,500 per job across the US, going by a national cost guide. That's the going rate nationally, not our price, and swapping a few bricks lands in a different place than repointing a tall wall. My on-site estimate gives you the number for your wall.
How do I know if my brick mortar needs repointing?
Your mortar needs repointing when it's worn back more than 1/4 inch, crumbling, full of holes or cracked away from the brick. You can check the joints yourself before you call, and photos of what you find help me size up the job.
Why should new mortar be no stronger than the old mortar?
Repointing mortar has to be as strong as the original or weaker, because harder mortar puts stress where brick meets mortar and can make the brick face break away. Ask any mason how they match the strength, and expect a straight answer.
Who gets the building permit for brick repair in Turlock?
In Turlock the property owner is responsible for the building permit, but a licensed contractor can submit and sign the application for you. The city issues permits for repairs, requiring one for masonry walls over 4 feet high and exempting masonry fences no taller than 5 feet. When your job needs one, we handle the paperwork.