Precision Turlock Concrete and Masonry
(209) 410-9284Get an estimate

Masonry contractor in Livingston, CA - brick, block and stone built for valley heat

Precision Turlock Concrete and Masonry is a masonry contractor based in Turlock that works in Livingston, CA, repairing and repointing brick, building block and retaining walls, and laying pavers, walkways and stone for homeowners here.

Curved stone seating surrounds a circular fire pit on a multicolored paver patio.

What we check on Livingston properties

Calls from Livingston are the same ones we get around Turlock: crumbling joints in older brick, a cracked block wall, or new driveway pavers or a retaining wall someone wants built right the first time. I look for the cause before I price the fix, because patching a crack while water or movement keeps working behind it just buys you a second repair.

The closest published weather averages, taken at the Modesto airfield about 21 miles off, put July highs around 95°F. Heat like that pulls water out of new mortar before it sets, so in summer we start early and keep fresh joints damp while they cure.

  • Mortar joints

    We check whether joints are soft, sandy or recessed, and whether an old repair used mortar harder than the brick, which can crack the brick faces.

  • Cracks and movement

    A crack's width, direction and whether it's still growing tell me if it's a surface repair or a sign the wall or footing is moving.

  • Where water goes

    Where a yard slopes toward the house or a sprinkler soaks a wall, water keeps feeding the damage, so we deal with that along with the masonry.

Curved brick retaining walls border a broad paved walkway leading through a wooded yard to a driveway.

From Turlock out to Livingston

We're based in Turlock and work across the cities around it in Stanislaus and Merced counties, Livingston included. It's the same work we do in Atwater, Delhi and Winton. I come out to look at every job myself, and our crew lead and masons do the work.

Price comes down to how much wall or ground is involved, how far the damage runs past what you can see, and whether we're matching old brick or stone. The schedule turns on whether your job needs a permit and how much has to come out before we build back. After I walk your job, I write up what I'd do.

Call (209) 410-9284 or use the form, and we'll set a time for me to come out. Photos help, and so does knowing when you first spotted the problem, whether it's grown and what's been repaired before, because that tells me old damage from new.

Area
Livingston, CA
Hours
Mon–Sun: 7 AM–10 PM
Based in
Turlock, CA 95380

Tell us what you're seeing

Send photos and a short note through the form, or call. We reply within one business day, and I come out for a free, no-obligation estimate on site.

To talk now, call

(209) 410-9284

Questions before you hire a mason

Another question? Call (209) 410-9284

Who issues building permits for masonry work in Livingston, CA?

The City of Livingston Building Division issues building permits and inspects the work. When your job needs a permit, we handle the application and paperwork with the city. Some minor projects, repairs among them, get a quick plan check at the counter, and the city doesn't do building inspections on Fridays, so we plan around that.

Does a masonry contractor in California need a state license?

Yes, once the job reaches $500. The Contractors State License Board says construction work valued at $500 or more in labor and/or materials must be done by a state-licensed contractor. Check with the board for its current rules before you sign anything. We're licensed and insured.

When does a remodel in Livingston need a waste bin on site?

The city wants a waste bin on site before it issues a permit for extensive remodeling, like reroofing or stripping interior or exterior wall covering. That can come up when old siding comes off for stone veneer. The building official can also require one on other jobs depending on size, and the bin company hauls everything away.

How much can a contractor ask for up front in California?

The Contractors State License Board says a down payment can be no more than $1,000 or 10 percent of the total contract price, whichever is less. Any other payments must be clearly listed in the contract and based on work done or materials delivered.

Call (209) 410-9284Get an estimate