Brick wall installation in Turlock CA - a solid wall placed right on your lot
Planning a brick wall but unsure how tall it can go or where it can sit? We settle that first, then build it solid.

Brick wall installation starts with where it sits
Most people call Precision Turlock Concrete and Masonry about brick wall installation with the same questions. How tall can the wall go, where can it sit, and does it need a permit? We build baked clay brick garden walls, privacy walls and fences. We're based in Turlock and work across the cities around it in Stanislaus and Merced counties.
Before we lay a brick, I settle where the wall sits on your lot and how tall it'll be, because that shapes the footing, the paperwork and the price. Height, length, the brick you pick and how easy your yard is to work in move the cost. A permit, when one's needed, is what the schedule waits on. We handle that application, and my estimate spells out the rest.
- Height and placement settled before the first brick
- Footing dug and set under the full length
- Level courses and even mortar joints
- Bare brick, so upkeep stays low

Pick the height before the brick
The height you want decides where the wall can sit, how big its footing gets and what the city wants to see, so we settle it before anything else.
Low front wall
- When it suits
- Edging a front yard or a planting bed close to the property line.
- What it takes
- Kept low enough for the space near the lot line, on a modest footing.
Garden wall
- When it suits
- Screening a patio or side yard without boxing the whole yard in.
- What it takes
- A solid footing and a check on whether its height needs a permit.
Tall privacy wall
- When it suits
- Blocking the view from a street or a neighbor along the back.
- What it takes
- Set back from the lot line, with a deeper footing and usually a permit.
How a brick wall gets built
Call or send a request
Call (209) 410-9284 or use the form, and tell us how tall you want the wall and where it'll go on your lot.
I walk the lot
I come out myself, look at where the wall will sit and how tall it should be, and write up what I'd build and why.
Permit paperwork
If the wall needs a permit, we take care of the application and paperwork with the city or county office your property falls under.
Our crew builds it
Our crew lead and masons dig and set the footing, then lay the brick course by course, keeping the courses level and the joints even.
I check it
I look the wall over myself before we call it done, and the crew clears out the scraps and leftover mortar.
What to sort out before we build
These choices decide how much wall you're buying and where it can stand, so they shape both the work and the number on my estimate.
Where your lot line is
Turlock wants the whole wall, footing included, on your own property even when no permit is needed, and the city says only a survey can pin the line down.
Easements under the wall
If a utility easement runs under the wall, the utility can tear it out to reach its lines and won't pay to rebuild it, so I'd keep brick off it.
Brick on the house
Industry guidance says full brick veneer on a house set on piers, like most modular homes, may need a new footing, while lighter thin brick can replace siding without a design change.
Brick or stone
Brick gives you even courses and color baked right into it. If you'd rather have a rougher, natural look, our stone masonry work starts with the same planning.
Brick walls worth a close look
Look for straight courses, even joints and a clean cap along the top, then open any example to see the detail up close.

Tell us about your wall
Send the height you want, where the wall goes on your lot and any survey you have. We reply within one business day to set up a free on-site estimate, no obligation.
To talk now, call
(209) 410-9284Brick wall questions we hear in Turlock
Another question? Call (209) 410-9284
Do I need a permit for a brick wall in Turlock?
Yes, if the wall stands over 4 feet from the bottom of its footing, the city says, though masonry fences no more than 5 feet above grade are exempt. Another city page sends walls over 6 feet to Building & Safety, so confirm the current rule with the Building & Safety Division. When yours needs one, we handle the paperwork.
How tall can a brick wall be on my property in Turlock?
Turlock caps walls on residential property at 7 feet, lattice included, and at 3 feet in the setback, the required distance back from the property line. A tall privacy wall has to sit back from the lot line, which is why I settle height and placement together.
Does a brick wall need to be painted or sealed?
No, clay brick needs no paint or surface treatment. Industry guidance says painted outside masonry needs repainting every three to five years, so we leave brick bare unless you ask for paint. Years from now, worn joints may call for brick pointing, refilling the mortar, but the brick face stays as it is.
How much does a brick wall cost in Turlock?
Brick and masonry work in the Modesto area usually costs about $11 to $30 per square foot. Where your wall lands depends on its height, length and footing, the brick you pick and how easy the yard is to reach, and I put that in writing at the estimate. We back the work with "Your satisfaction, guaranteed."
Does a contractor need a license to build a brick wall in California?
Yes, building baked clay brick walls and fences falls under the state's C-29 Masonry Contractor license, whether the wall carries a load or not. Even a job under $1,000 needs a licensed contractor if it needs any permit or the person hires helpers. We're licensed and insured.
