Precision Turlock Concrete and Masonry
(209) 410-9284Get an estimate

Masonry Contractor in Hilmar, CA - Repairs That Fix the Real Cause

Precision Turlock Concrete and Masonry is a masonry contractor working in Hilmar, CA. From our base in Turlock, we repair and repoint brick, build block and retaining walls, and lay pavers and walkways for homeowners here.

Stone outdoor kitchen with a stainless-steel pizza oven, built-in fire pit, and cushioned seating.

What I look at on a Hilmar property

Most of our calls come down to crumbling joints, a cracked wall, or something new you want built right. Before I price a repair, I look for what caused it, because patching a crack over a footing or water problem just sets up a second repair.

Hilmar sits outside any city limits, so Merced County's rules apply here, not a city's. For a new wall, footing or slab, the county planning department is the first stop for zoning, and its staff also check whether a structure sits in a flood zone, which can change a project a lot. I'd rather know that before I draw anything up.

  • Mortar joints

    We check how deep the mortar has worn and whether the brick is sound, since mortar harder than old brick can crack it.

  • Cracks and lean

    A crack's width and direction, and whether a wall leans, tell us if it's settling at the footing or just aging at the surface.

  • Water at the base

    Where a yard slopes toward a wall or the house, water sits at the base, so we look at drainage before we rebuild anything.

  • Your property line

    The county wants fences and retaining walls fully on your own property, footing included, so we confirm where the line runs before we dig.

Stone masonry outdoor fireplace with a tall chimney stands between low stone walls on a concrete patio.

Reaching Hilmar from our Turlock base

We're based in Turlock and work across the cities around it in Stanislaus and Merced counties. Hilmar falls on the Merced County side, and we do the same work here as in Delhi, Livingston and Keyes. I look at each job myself, and our crew lead and masons do the work.

Price moves with the size of the job, how tall a wall runs and how deep its footing goes, how much old mortar or brick has to come out, and how easy it is to reach the spot. The schedule turns mostly on whether the county wants a permit for it, and on our crew's calendar.

Before you call, snap a few photos and jot down a rough length and height, plus the age of the brick if you know it. I'll set a time to walk the job and write up what I'd do, so your figure comes from what's actually there.

Area
Hilmar, CA
Hours
Mon–Sun: 7 AM–10 PM
Based in
Turlock, CA 95380

Tell us about your Hilmar job

Describe the job on the form or call (209) 410-9284. We reply within one business day, then I come out for a free, no-obligation estimate.

To talk now, call

(209) 410-9284

Hilmar masonry questions, answered

Another question? Call (209) 410-9284

Who issues building permits for masonry work in Hilmar, CA?

Merced County's Building and Safety Division issues permits and inspects all construction in the county's unincorporated areas, which include Hilmar. The county guide's rule of thumb calls for a permit on new construction, additions, alterations and repairs, with exceptions mostly for minor repairs. When your job needs one, we handle the application and paperwork with the county.

Does a block or retaining wall in Hilmar need a permit?

Under the county guide, masonry, concrete or retaining walls over 4 feet tall need a building permit, and that height is measured from the bottom of the footing. So a wall that looks under 4 feet above ground can still need one. We measure from the footing when we plan your wall.

Does my masonry contractor need a California state license?

Yes, when the job needs a building permit, uses any extra workers, or costs $1,000 or more in labor and materials across one or more contracts. That's the Contractors State License Board's rule, and in Merced County only the owner or a licensed contractor can get a building permit. We're licensed and insured.

Does a contractor working in Hilmar need a Merced County business license?

Yes. Merced County requires a county business license from every business located in or doing business in its unincorporated areas, and that includes Hilmar. It's a fair thing to ask any contractor about before you sign.

Do I need a permit for a new driveway in Hilmar?

A driveway curb cut, the opening where your drive meets the street, always needs a county permit, and other work in the public right-of-way may need an encroachment permit. For pavers on your own side, we check with the county before we start, and if it needs a permit, we handle the paperwork.

Call (209) 410-9284Get an estimate