Stone veneer installation in Turlock CA - stone set right on a sound wall
Have a bare wall you'd like faced in stone? We check the wall behind it first, then set the stone so it holds up.
Stone veneer is only as good as the wall
Stone veneer installation in Turlock means bonding a layer of natural or manufactured stone to a wall with mortar. I check the wall behind it first, because veneer belongs on a sound wall and won't fix a bad one. If the block underneath is cracked or crumbling, we deal with that first, and on a foundation that can mean foundation block wall installation before any stone goes up.
Installed with care, stone veneer can perform for decades. When it fails, the cause is usually the install, not the stone, so our crew takes its time on the water barrier and the base. Your price depends on the wall's condition, its surface, the stone you choose and how much wall there is. The weather and any permit set the schedule, and we handle the permit paperwork. I'll walk the wall and write up what I'd do.
- Wall checked and sound before any stone
- Water barrier laid with care behind the stone
- Bottom edge kept off soil and paving
- Even joints and a clean stone face
How the stone meets your wall
What your wall is made of decides how the stone attaches. That prep is a big part of what I write up and of what the job takes.
Bond straight on
- When it fits
- Clean, rough concrete or concrete block walls with no paint, sealer or form oil.
- What we do
- We clean the face and set the stone right into mortar.
Lath and scratch coat
- When it fits
- Concrete or block that won't bond, or a framed wall with sheathing.
- What we do
- We fasten metal mesh called lath and a rough mortar base coat, then set the stone.
A different plan
- When it fits
- Clay brick, since manufactured stone isn't bonded straight to it.
- What we do
- I look at the brick on site and lay out the right approach.
From first look to final check
I look at the wall
I come out myself, check the wall where the stone will go, and write up what I'd do and what the job takes.
Permit and stone
If your job needs a permit, we handle the paperwork with the city or county office your property falls under. You pick the stone with my input.
Prep, barrier and stone
Our crew lead and masons prep the surface and take their time on the water barrier and the base, then set the stone in mortar.
Check and clean up
I check the work myself before we call it done, and the crew cleans up the site before we leave.
What to settle before the stone
The stone you pick, the weather and the layers behind the wall all shape how we plan the job and what goes into the estimate.
Picking natural stone
Not every natural stone is suggested for outdoor walls, so ask the supplier to certify that yours suits the weather where you live. Stone with a history of holding up to local weather does best.
A dry, mild window
One stone maker's guide calls for setting its stone at 40°F or warmer, then keeping rain and freezing off it for 48 hours. Plan for a dry, mild stretch with that window clear.
Layers behind the stone
Over wood sheathing outside, the installation standard calls for two separate layers of water barrier, lapped like shingles so water runs down and out. Ask any installer how they'll layer it.
Building in Turlock
The city puts all buildings and other structures within Turlock city limits in Seismic Design Category D, one of the higher earthquake design levels, unless analysis justifies otherwise.
Stone veneer, up close
Look at the joints, the bottom edge and how the stone wraps the corners. Open any example to see the detail.
Tell us about your wall
Send photos of the wall, what it's made of and a rough size, or call. We reply within one business day to set up your free, no-obligation estimate.
To talk now, call
(209) 410-9284Stone veneer questions we hear
Another question? Call (209) 410-9284
How much does stone veneer installation cost in Turlock?
Across the US, installing stone veneer usually costs about $25 to $40 per square foot. That's the market's range, not our price, and where your wall lands depends on its condition, the prep its surface needs and the stone you pick. I'll come out, look it over and write up what I'd do.
Can stone veneer go over my existing wall?
It can if the wall is sound. Industry guidance keeps this veneer off deteriorating walls and off EIFS, the foam-and-stucco siding system, because stone is only as good as what's behind it. I check your wall first and tell you straight if it needs repair before any stone goes up.
Who handles the building permit for stone veneer in Turlock?
In Turlock, the property owner is responsible for getting a building permit, and a licensed contractor or someone the owner authorizes can sign the application. Not all construction needs one, so check your job against the city's building permits page. When your job needs a permit, we handle the application and paperwork.
Who can install stone veneer in California?
Stone veneer is masonry contractor work. California's Contractors State License Board lists natural and manufactured stone among what a masonry contractor installs. It's fair to ask anyone you're thinking of hiring about their license, and for the record, we're licensed and insured.